phpMyAdmin
Forumregels
Dit forum is voor alle zinnige gesprekken buiten phpBB om. Discussies en gesprekken over interessante onderwerpen.
Een nieuw onderwerp moet..:
Dit forum is voor alle zinnige gesprekken buiten phpBB om. Discussies en gesprekken over interessante onderwerpen.
Een nieuw onderwerp moet..:
- uiteraard voldoen aan de algemene voorwaarden
- niet passen in de gewone supportfora
- interessante zijn voor het overgrote deel van onze gebruikers
- een neutrale of positieve ondertoon hebben
- anders zijn dan bestaande onderwerpen
- Xanland
- Berichten: 828
- Lid geworden op: 23 jan 2005, 17:02
- Locatie: Apeldoorn, The Netherlands
- Contacteer:
phpMyAdmin
Hallo Allemaal,
Ik heb net phpMyAdmin zitten installeren. Met behulp van jullie KB, maar als ik http://62.195.231.114/phpmyadmin/index.php in wil gaan krijg ik een foutmelding. Hoe kan ik dit probleem oplossen. Voor mijn weten heb ik alles goed ingesteld!
Of kan iemand mij een soort van config.inc.php geven (ipv wachtwoorden, sterretjes enzo.)?
Ik heb net phpMyAdmin zitten installeren. Met behulp van jullie KB, maar als ik http://62.195.231.114/phpmyadmin/index.php in wil gaan krijg ik een foutmelding. Hoe kan ik dit probleem oplossen. Voor mijn weten heb ik alles goed ingesteld!
Of kan iemand mij een soort van config.inc.php geven (ipv wachtwoorden, sterretjes enzo.)?
- Xanland
- Berichten: 828
- Lid geworden op: 23 jan 2005, 17:02
- Locatie: Apeldoorn, The Netherlands
- Contacteer:
Ok, PHP en MySQL is allemaal geïnstalleerd. En ook zo dat alles klopt (volgens mij). Maar ik krijg nog steeds die foutmelding. Ook "config.inc.php" is goed (bij/voor mij weten) ingevuld!
En hoe kan ik phpMyAdmin het beste beveiligen??
Voor als je nog andere info wil hebben PB mij even!
En hoe kan ik phpMyAdmin het beste beveiligen??
Voor als je nog andere info wil hebben PB mij even!
- Xanland
- Berichten: 828
- Lid geworden op: 23 jan 2005, 17:02
- Locatie: Apeldoorn, The Netherlands
- Contacteer:
Xanland schreef:MySQL is allemaal geïnstalleerd
Code: Selecteer alles
/**
* Your phpMyAdmin URL.
*
* Complete the variable below with the full url ie
* http://"mijn-ip"/phpmyadmin/index.php
*
* It must contain characters that are valid for a URL, and the path is
* case sensitive on some Web servers, for example Unix-based servers.
*
* In most cases you can leave this variable empty, as the correct value
* will be detected automatically. However, we recommend that you do
* test to see that the auto-detection code works in your system. A good
* test is to browse a table, then edit a row and save it. There will be
* an error message if phpMyAdmin cannot auto-detect the correct value.
*/
$cfg['PmaAbsoluteUri'] = 'http://"mijn-ip"/phpmyadmin/';
/**
* Disable the default warning that is displayed on the DB Details Structure page if
* any of the required Tables for the relationfeatures could not be found
*/
$cfg['PmaNoRelation_DisableWarning'] = TRUE;
/**
* The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
* at least one server configuration uses 'cookie' auth_type, enter here a
* passphrase that will be used by blowfish. The maximum length seems to be 46
* characters.
*/
$cfg['blowfish_secret'] = '';
/**
* Server(s) configuration
*/
$i = 0;
// The $cfg['Servers'] array starts with $cfg['Servers'][1]. Do not use $cfg['Servers'][0].
// You can disable a server config entry by setting host to ''.
$i++;
$cfg['Servers'][$i]['host'] = 'localhost';// MySQL hostname or IP address
$cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port
$cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket
$cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket')
$cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli')
$cfg['Servers'][$i]['compress'] = TRUE; // Use compressed protocol for the MySQL connection
// (requires PHP >= 4.3.0)
$cfg['Servers'][$i]['controluser'] = '*username*'; // MySQL control user settings
// (this user must have read-only
$cfg['Servers'][$i]['controlpass'] = '*******'; // access to the "mysql/user"
// and "mysql/db" tables).
// The controluser is also
// used for all relational
// features (pmadb)
$cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (config, http or cookie based)?
$cfg['Servers'][$i]['user'] = '-root-'; // MySQL user
$cfg['Servers'][$i]['password'] = '*******'; // MySQL password (only needed
// with 'config' auth_type)
$cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only
// this db is displayed in left frame
// It may also be an array of db-names, where sorting order is relevant.
$cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname
$cfg['Servers'][$i]['pmadb'] = 'xanland'; // Database used for Relation, Bookmark and PDF Features
// (see scripts/create_tables.sql)
// - leave blank for no support
// DEFAULT: 'phpmyadmin'
$cfg['Servers'][$i]['bookmarktable'] = 'xanland_bookmarks';// Bookmark table
// - leave blank for no bookmark support
// DEFAULT: 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc)
// - leave blank for no relation-links support
// DEFAULT: 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields
// - leave blank for no display fields support
// DEFAULT: 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema
// - leave blank for no PDF schema support
// DEFAULT: 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf
// - leave blank if you don't want to use this
// DEFAULT: 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // table to store column information
// - leave blank for no column comments/mime types
// DEFAULT: 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // table to store SQL history
// - leave blank for no SQL query history
// DEFAULT: 'pma_history'
$cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables
// are up to date. This prevents compatibility
// checks and thereby increases performance.
$cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login
$cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use
= '';
$cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults
= array();
Voor als je nog andere info wil hebben PB mij even!
Je moet eerst een tweede gebruiker aanmaken, met alle rechten. Vervolgens verwijder/hernoem je de root gebruiker. Als je een ander auth type gebruikt worden gebruikersnaam en wachtwoord niet uit het bestand gelezen, en moet je voor je bezoek inloggen. Aangezien je hier de link heb gepost is het STRIKT NOODZAKELIJK EN ZWAAR AAN TE BEVELEN deze aanwijzingen op te volgen.
... Maar ik modereer (nog) niet.
- Xanland
- Berichten: 828
- Lid geworden op: 23 jan 2005, 17:02
- Locatie: Apeldoorn, The Netherlands
- Contacteer:
MySQL en Apache zijn gestart.
MySQL en PHP zijn via een .exe-bestand geïnstalleerd!
Dus wat is/kan (er) fout gegaan zijn???
MySQL en PHP zijn via een .exe-bestand geïnstalleerd!
Dus wat is/kan (er) fout gegaan zijn???
Laatst gewijzigd door Xanland op 19 nov 2005, 21:10, 1 keer totaal gewijzigd.
Hey hey,
Zet mijn vraag maar even hier neer. Ik wilde phpMyAdmin installeren voor de back up. Maar vraag ik me af: Is de back up van DirectAdmin / op de server niet voldoende? En waarom niet?
Forum installeren is aardig gelukt! Veel gelezen hier en jullie zijn echt goed
Tnx!
*phpAdmin zit dus wel al op DirectAdmin.. alleen moet je eerst de pagina refreshen
maar wil toch wel graag weten waarom dit beter is dan een gewone back up. 
Zet mijn vraag maar even hier neer. Ik wilde phpMyAdmin installeren voor de back up. Maar vraag ik me af: Is de back up van DirectAdmin / op de server niet voldoende? En waarom niet?
Forum installeren is aardig gelukt! Veel gelezen hier en jullie zijn echt goed

Tnx!

*phpAdmin zit dus wel al op DirectAdmin.. alleen moet je eerst de pagina refreshen

