HELP!!

Installatie lukt niet? Plotseling een foutmelding. Of weet je niet hoe iets werkt. Problemen met phpBB2 kun je in dit archief opzoeken.
Forumregels

Sinds 1 januari 2009 wordt phpBB2 niet meer ondersteund.
Onderstaande informatie is verouderd en dient uitsluitend als archief.
phpBB2.0.x
Gesloten
Marit
Berichten: 33
Lid geworden op: 26 jun 2003, 00:37

HELP!!

Bericht door Marit » 23 okt 2003, 13:18

Parse error: parse error, expecting `T_OLD_FUNCTION' or `T_FUNCTION' or `T_VAR' or `'}'' in /hsphere/local/home/mkramer/kyka.nl/forum/includes/emailer.php on line 41

Fatal error: Cannot instantiate non-existent class: emailer in /hsphere/local/home/mkramer/kyka.nl/forum/includes/functions_post.php on line 659

Ik snap nie...
kan iemand mij helpen ajb?

Gebruikersavatar
headout
Berichten: 1082
Lid geworden op: 11 dec 2002, 19:55
Contacteer:

Bericht door headout » 23 okt 2003, 13:28

Welke mod heb je toegepast op je forum?
http://phpbb3.nl Jouw gratis forumprovider!

Marit
Berichten: 33
Lid geworden op: 26 jun 2003, 00:37

Bericht door Marit » 23 okt 2003, 13:38

geen mod... , maar de update van 2.05 naar 2.06... :?
http://www.phpbb.nl/phpBB/viewtopic.php?t=3008

Gebruikersavatar
DaMnNaTiOn
Berichten: 2555
Lid geworden op: 11 dec 2002, 18:29
Locatie: localhost
Contacteer:

Bericht door DaMnNaTiOn » 23 okt 2003, 13:41

Dit moet je ook aanpassen aan je forum: http://www.phpbb.com/phpBB/viewtopic.php?t=135116
lastmodified.net

Marit
Berichten: 33
Lid geworden op: 26 jun 2003, 00:37

Bericht door Marit » 23 okt 2003, 13:52

Ok.. done.. dat zou het probleem moeten verhelpen?
Ik kreeg de foutmelding namelijk niet constant, dus ik weet niet of hij nu weg is ja of nee, maar in ieder geval bedankt!!!

Gebruikersavatar
Kaza
Berichten: 604
Lid geworden op: 13 sep 2003, 07:46
Locatie: Rotterdam
Contacteer:

Bericht door Kaza » 23 okt 2003, 13:56

DaMnNaTiOn schreef:Dit moet je ook aanpassen aan je forum: http://www.phpbb.com/phpBB/viewtopic.php?t=135116
Dit heeft dus met een BBcodes te maken, daar zat een veiligheidslek in

maar zo te zien heeft het te maken met je e-mail.
Gebruik je pop3 of gewoon de interne mail functie?
Last edited by Kazango on Sat sep 23, 2004 6:35 am; edited 458 times in total

Marit
Berichten: 33
Lid geworden op: 26 jun 2003, 00:37

Bericht door Marit » 23 okt 2003, 14:26

volgens mij een interne mail functie.. mijn mass email heeft nooit gewerkt en ik heb nooit begrepen waarom niet, misschien dat daar idd ook een probleem ligt en dat hij nu in de nieuwe configuratie naar boven komt...?
ik kan me geen pop3 heugen op mijn forum, die gebruikt ik alleen in mijn outlook :wink:


15:07;

het probleem is dus nog niet verholpen...
berichtjes worden dubbel geplaatst terwijl er maar 1 keer wordt geklikt.... :cry:

15:28 ;

Code: Selecteer alles

Parse error: parse error, expecting `T_OLD_FUNCTION' or `T_FUNCTION' or `T_VAR' or `'}'' in /hsphere/local/home/mkramer/kyka.nl/forum/includes/emailer.php on line 41

Fatal error: Cannot instantiate non-existent class: emailer in /hsphere/local/home/mkramer/kyka.nl/forum/privmsg.php on line 1310

Marit
Berichten: 33
Lid geworden op: 26 jun 2003, 00:37

Bericht door Marit » 23 okt 2003, 14:31

Ik had eerste alleen het eerste stuk geplaatst... maar ik weet niet of jullie daar genoeg aan heben... toch maar helemaal...

Hopelijk zijn jullie slimmer dan ik en zien jullie wel de fout... :? :oops:

Code: Selecteer alles

<?php
/***************************************************************************
                                emailer.php
                             -------------------
    begin                : Sunday Aug. 12, 2001
    copyright            : (C) 2001 The phpBB Group
    email                : support@phpbb.com

    $Id: emailer.php,v 1.15.2.29 2003/06/15 12:08:20 acydburn Exp $

***************************************************************************/

/***************************************************************************
 *
 *   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; either version 2 of the License, or
 *   (at your option) any later version.
 *
 ***************************************************************************/

//
// The emailer class has support for attaching files, that isn't implemented
// in the 2.0 release but we can probable find some way of using it in a future
// release
//
class emailer
{
	var $msg, $subject, $extra_headers;
	var $addresses, $reply_to, $from;
	var $use_smtp;

	var $tpl_msg = array();

	function emailer($use_smtp)
	{
		$this->reset();
		$this->use_smtp = $use_smtp;
	}

		$this->reply_to = $this->from = '';
	}

	// Resets all the data (address, template file, etc etc to default
	function reset()
	{
		$this->addresses = array();
		$this->vars = $this->msg = $this->extra_headers = '';
	}

	// Sets an email address to send to
	function email_address($address)
	{
		$this->addresses['to'] = trim($address);
	}

	function cc($address)
	{
		$this->addresses['cc'][] = trim($address);
	}

	function bcc($address)
	{
		$this->addresses['bcc'][] = trim($address);
	}

	function replyto($address)
	{
		$this->reply_to = trim($address);
	}

	function from($address)
	{
		$this->from = trim($address);
	}

	// set up subject for mail
	function set_subject($subject = '')
	{
		$this->subject = trim(preg_replace('#[\n\r]+#s', '', $subject));

	}
	// set up extra mail headers
	function extra_headers($headers)
	{
		$this->extra_headers .= trim($headers) . "\n";
	}

	function use_template($template_file, $template_lang = '')
	{
		global $board_config, $phpbb_root_path;

		if (trim($template_file) == '')
		{
			message_die(GENERAL_ERROR, 'No template file set', '', __LINE__, __FILE__);
		}

		if (trim($template_lang) == '')
		{
			$template_lang = $board_config['default_lang'];
		}

		if (empty($this->tpl_msg[$template_lang . $template_file]))
		{
			$tpl_file = $phpbb_root_path . 'language/lang_' . $template_lang . '/email/' . $template_file . '.tpl';

			if (!@file_exists(@phpbb_realpath($tpl_file)))
			{
				$tpl_file = $phpbb_root_path . 'language/lang_' . $board_config['default_lang'] . '/email/' . $template_file . '.tpl';

				if (!@file_exists(@phpbb_realpath($tpl_file)))
				{
					message_die(GENERAL_ERROR, 'Could not find email template file :: ' . $template_file, '', __LINE__, __FILE__);
				}
			}

			if (!($fd = @fopen($tpl_file, 'r')))
			{
				message_die(GENERAL_ERROR, 'Failed opening template file :: ' . $tpl_file, '', __LINE__, __FILE__);
			}

			$this->tpl_msg[$template_lang . $template_file] = fread($fd, filesize($tpl_file));
			fclose($fd);
		}

		$this->msg = $this->tpl_msg[$template_lang . $template_file];

		return true;
	}

	// assign variables
	function assign_vars($vars)
	{
		$this->vars = (empty($this->vars)) ? $vars : $this->vars . $vars;
	}

	// Send the mail out to the recipients set previously in var $this->address
	function send()
	{
		global $board_config, $lang, $phpEx, $phpbb_root_path, $db;

    	// Escape all quotes, else the eval will fail.
		$this->msg = str_replace ("'", "\'", $this->msg);
		$this->msg = preg_replace('#\{([a-z0-9\-_]*?)\}#is', "' . $\\1 . '", $this->msg);

		// Set vars
		reset ($this->vars);
		while (list($key, $val) = each($this->vars)) 
		{
			$$key = $val;
		}

		eval("\$this->msg = '$this->msg';");

		// Clear vars
		reset ($this->vars);
		while (list($key, $val) = each($this->vars)) 
		{
			unset($$key);
		}

		// We now try and pull a subject from the email body ... if it exists,
		// do this here because the subject may contain a variable
		$drop_header = '';
		$match = array();
		if (preg_match('#^(Subject:(.*?))$#m', $this->msg, $match))
		{
			$this->subject = (trim($match[2]) != '') ? trim($match[2]) : (($this->subject != '') ? $this->subject : 'No Subject');
			$drop_header .= '[\r\n]*?' . phpbb_preg_quote($match[1], '#');
		}
		else
		{
			$this->subject = (($this->subject != '') ? $this->subject : 'No Subject');
		}

		if (preg_match('#^(Charset:(.*?))$#m', $this->msg, $match))
		{
			$this->encoding = (trim($match[2]) != '') ? trim($match[2]) : trim($lang['ENCODING']);
			$drop_header .= '[\r\n]*?' . phpbb_preg_quote($match[1], '#');
		}
		else
		{
			$this->encoding = trim($lang['ENCODING']);
		}

		if ($drop_header != '')
		{
			$this->msg = trim(preg_replace('#' . $drop_header . '#s', '', $this->msg));
		}

		$to = $this->addresses['to'];

		$cc = (count($this->addresses['cc'])) ? implode(', ', $this->addresses['cc']) : '';
		$bcc = (count($this->addresses['bcc'])) ? implode(', ', $this->addresses['bcc']) : '';

		// Build header
		$this->extra_headers = (($this->reply_to != '') ? "Reply-to: $this->reply_to\n" : '') . (($this->from != '') ? "From: $this->from\n" : "From: " . $board_config['board_email'] . "\n") . "Return-Path: " . $board_config['board_email'] . "\nMessage-ID: <" . md5(uniqid(time())) . "@" . $board_config['server_name'] . ">\nMIME-Version: 1.0\nContent-type: text/plain; charset=" . $this->encoding . "\nContent-transfer-encoding: 8bit\nDate: " . date('r', time()) . "\nX-Priority: 3\nX-MSMail-Priority: Normal\nX-Mailer: PHP\nX-MimeOLE: Produced By phpBB2\n" . $this->extra_headers . (($cc != '') ? "Cc: $cc\n" : '')  . (($bcc != '') ? "Bcc: $bcc\n" : ''); 

		// Send message ... removed $this->encode() from subject for time being
		if ( $this->use_smtp )
		{
			if ( !defined('SMTP_INCLUDED') ) 
			{
				include($phpbb_root_path . 'includes/smtp.' . $phpEx);
			}

			$result = smtpmail($to, $this->subject, $this->msg, $this->extra_headers);
		}
		else
		{
			$empty_to_header = ($to == '') ? TRUE : FALSE;
			$to = ($to == '') ? (($board_config['sendmail_fix']) ? ' ' : 'Undisclosed-recipients:;') : $to;

			$result = @mail($to, $this->subject, preg_replace("#(?<!\r)\n#s", "\n", $this->msg), $this->extra_headers);
			
			if (!$result && !$board_config['sendmail_fix'] && $empty_to_header)
			{
				$to = ' ';

				$sql = "UPDATE " . CONFIG_TABLE . " 
					SET config_value = '1'
					WHERE config_name = 'sendmail_fix'";
				if (!$db->sql_query($sql))
				{
					message_die(GENERAL_ERROR, 'Unable to update config table', '', __LINE__, __FILE__, $sql);
				}

				$board_config['sendmail_fix'] = 1;
				$result = @mail($to, $this->subject, preg_replace("#(?<!\r)\n#s", "\n", $this->msg), $this->extra_headers);
			}
		}

		// Did it work?
		if (!$result)
		{
			message_die(GENERAL_ERROR, 'Failed sending email :: ' . (($this->use_smtp) ? 'SMTP' : 'PHP') . ' :: ' . $result, '', __LINE__, __FILE__);
		}

		return true;
	}

	// Encodes the given string for proper display for this encoding ... nabbed 
	// from php.net and modified. There is an alternative encoding method which 
	// may produce lesd output but it's questionable as to its worth in this 
	// scenario IMO
	function encode($str)
	{
		if ($this->encoding == '')
		{
			return $str;
		}

		// define start delimimter, end delimiter and spacer
		$end = "?=";
		$start = "=?$this->encoding?B?";
		$spacer = "$end\r\n $start";

		// determine length of encoded text within chunks and ensure length is even
		$length = 75 - strlen($start) - strlen($end);
		$length = floor($length / 2) * 2;

		// encode the string and split it into chunks with spacers after each chunk
		$str = chunk_split(base64_encode($str), $length, $spacer);

		// remove trailing spacer and add start and end delimiters
		$str = preg_replace('#' . phpbb_preg_quote($spacer, '#') . '$#', '', $str);

		return $start . $str . $end;
	}

	//
	// Attach files via MIME.
	//
	function attachFile($filename, $mimetype = "application/octet-stream", $szFromAddress, $szFilenameToDisplay)
	{
		global $lang;
		$mime_boundary = "--==================_846811060==_";

		$this->msg = '--' . $mime_boundary . "\nContent-Type: text/plain;\n\tcharset=\"" . $lang['ENCODING'] . "\"\n\n" . $this->msg;

		if ($mime_filename)
		{
			$filename = $mime_filename;
			$encoded = $this->encode_file($filename);
		}

		$fd = fopen($filename, "r");
		$contents = fread($fd, filesize($filename));

		$this->mimeOut = "--" . $mime_boundary . "\n";
		$this->mimeOut .= "Content-Type: " . $mimetype . ";\n\tname=\"$szFilenameToDisplay\"\n";
		$this->mimeOut .= "Content-Transfer-Encoding: quoted-printable\n";
		$this->mimeOut .= "Content-Disposition: attachment;\n\tfilename=\"$szFilenameToDisplay\"\n\n";

		if ( $mimetype == "message/rfc822" )
		{
			$this->mimeOut .= "From: ".$szFromAddress."\n";
			$this->mimeOut .= "To: ".$this->emailAddress."\n";
			$this->mimeOut .= "Date: ".date("D, d M Y H:i:s") . " UT\n";
			$this->mimeOut .= "Reply-To:".$szFromAddress."\n";
			$this->mimeOut .= "Subject: ".$this->mailSubject."\n";
			$this->mimeOut .= "X-Mailer: PHP/".phpversion()."\n";
			$this->mimeOut .= "MIME-Version: 1.0\n";
		}

		$this->mimeOut .= $contents."\n";
		$this->mimeOut .= "--" . $mime_boundary . "--" . "\n";

		return $out;
		// added -- to notify email client attachment is done
	}

	function getMimeHeaders($filename, $mime_filename="")
	{
		$mime_boundary = "--==================_846811060==_";

		if ($mime_filename)
		{
			$filename = $mime_filename;
		}

		$out = "MIME-Version: 1.0\n";
		$out .= "Content-Type: multipart/mixed;\n\tboundary=\"$mime_boundary\"\n\n";
		$out .= "This message is in MIME format. Since your mail reader does not understand\n";
		$out .= "this format, some or all of this message may not be legible.";

		return $out;
	}

	//
   // Split string by RFC 2045 semantics (76 chars per line, end with \r\n).
	//
	function myChunkSplit($str)
	{
		$stmp = $str;
		$len = strlen($stmp);
		$out = "";

		while ($len > 0)
		{
			if ($len >= 76)
			{
				$out .= substr($stmp, 0, 76) . "\r\n";
				$stmp = substr($stmp, 76);
				$len = $len - 76;
			}
			else
			{
				$out .= $stmp . "\r\n";
				$stmp = "";
				$len = 0;
			}
		}
		return $out;
	}

	//
   // Split the specified file up into a string and return it
	//
	function encode_file($sourcefile)
	{
		if (is_readable(phpbb_realpath($sourcefile)))
		{
			$fd = fopen($sourcefile, "r");
			$contents = fread($fd, filesize($sourcefile));
	      $encoded = $this->myChunkSplit(base64_encode($contents));
	      fclose($fd);
		}

		return $encoded;
	}

} // class emailer

?>

Gesloten